Registered: Jan 2000
Location:
Posts: 47

I was tring to hook my visor up with an external modem, but it's keep saying "modem not found".

one thing I noticed that, whenever I turn the visor off, the RD and SD signals on the modem turn on, and when the visor is on, those 2 signals keep off.

the cable and adapters I'm using are:
1, Visor's serial cradle (9 pin, F)
2, 9 pin M -> 25 pin F adapter
3, 25 pin M -> 25 pin F gender changer
4, 25 pin null modem adapter
(all these 3 adapters above are shielded and grounded)
5, USR Sportster 28800 external modem

TIA for the help!

Registered: Dec 1999
Location:
Posts: 54

I have had success using a home made serial cable and connecting to my laptop or other serial device using "Online" terminal program from www.markspace.com. Are you trying to hotsync with this external modem? I think that the hotsync program is looking for the "handspring" modem not a generic external modem. I made my serial cable from this schematic on http://rus.homepage.com...
try the terminal program and something like "procomm" terminal software on your PC that will look at data coming in on the serial port.

Registered: Jan 2000
Location:
Posts: 47

quote:

---

Originally posted by nitehawk:
Are you trying to hotsync with this external modem?

---

Registered: Jan 2000
Location:
Posts: 20

FWIW,
I've gotten my IVDX to establish a ppp link throught the serial cradle to my Linux box using ppp and pilot-ppp (can be found on freshmeat.net). Anyone trying might need to add 'noauth' to the start scipt, I did.

On the visor side I had to put a blank space in username, password, and phone, and blank out the modem init to work.

Depending on your external modem it may need a different than the one currently selected, try just at&f for the USR.