Registered: Mar 2001
Location: Austin, Texas
Posts: 39

Hey.... You think that a serial will work just fine.... I might have to do that.. and get teh back up ...

also.... I thought that the palm desktop 4 ... would not work with the hanspring....

trg

__________________
Austin, Texas

Registered: Dec 1999
Location: MO
Posts: 6

resets, etc. have not worked 4 me

I guess I am going to have to get the serial cradle (which totally bites ). None of the fixes above have worked for me, including the hard reset. Thanx anyway.

Registered: Jan 2001
Location:
Posts: 30

Try this Solution
Make sure HS Manager is running
Go to the device manager and try the hotsync than, you should see a new device appear, rightclick on it and reinstall drivers pointing to the location where palm desktop is installed. In the case you dont see the new device pop up. If you want to save your self some time buy a serial craddle.

Registered: Mar 2001
Location: Austin, Texas
Posts: 39

TXag and SKy....

I got it to work... the hot sync... lets see... about a week... 32 pots of coffee .. and I have it working ...

I had to following the instructions and clear the mem... hard reset I think was the answer.....

Now though I cannot get mail to work... the basic mail to work... the log says to rerun the setup.... I go to the setup in the windows menu... and when I click on it ... nothing happens... it does not launch... what I pain.....

ideas?

THanks
trg

__________________
Austin, Texas

Registered: Jun 2001
Location: Texas
Posts: 16

no mail

trg,

What email client do you use? Did you ever reinstall your Hot Sync software?

-txag98

Registered: Mar 2001
Location: Austin, Texas
Posts: 39

I am using outlook 2000... and I did...

What I did was ...

I uninstalled everything that was palm. Deleted the dir. then I cleared the USB in control panel. rebooted the PC.. and hard reset the Visor and re installed from the Cd... worked...

everything but the mail...

Thanks Terry

__________________
Austin, Texas

Registered: Dec 1999
Location: MO
Posts: 6

getting Desktop to work with W2000

Spoke with the Handspring super-guru yesterday (the first two generic gurus couldn't cut it).

Seriously, they suggested that I go through all the above (except the hard reset) (uninstall hardware Handspring USB (go to Device Manager to make sure nothing was hanging around), uninstall Palm Desktop and Conduit), reboot, then do a search for anything Palm AND Visor and delete it, then reinstall. It appears that there was an old Visor.dll file from the Win98 days that was goofing things up.

I am sure you all thought of this, but I apparently didn't do it all together, so something was sneaking through.

Thanx to all for your suggestions and to HS too (finally). (Now if I can just get HS to cancel the ^&!$ serial cradle order.)

Registered: Nov 1999
Location: Ann Arbor, Michigan USA
Posts: 790

BTW, there's a FAQ and link to the VisorUSBRegClean.exe utility here.

__________________
Jeff

Registered: Nov 1999
Location: Ann Arbor, Michigan USA
Posts: 790

Hardware prob can stop USB sync too

My VDX stopped synching via USB after I dropped it from 3 feet onto industrial carpet. I went through the steps suggested it this thread just to be sure, but when they didn't help, I opened the case. Sure enough a component, Y1, fell out . I'm way out of warranty and w/o a protection plan.
I've found a local computer repair shop that can do surface-mount touch-ups, so I'm hoping they can replace it and I'll be all set.

BTW - if you are interested, I did a little web research: Y1 appears to be a 6Mhz crystal oscilator. Apparantly the USB standard is somehow based on a 6Mhz frequency. Without the crystal, my VDX could no longer "speak" USB.

UPDATE: I just got back from the repair shop and I am now able to hotsync with USB!!

__________________
Jeff

Last edited by PDAENVY on 07-13-2001 at 08:19 PM