Registered: Oct 2000
Location: Here
Posts: 213

More memory is REALLY needed, but this is the wrong implimentation

Probably the thing that I would like MOST for my Prism, would be more "internal" memory. However the probability of needing replacement of the Visor from loss or breakage is to high to justify a 3rd party solution here. The ultimate for me would be CF internal memory upgrade leaving the springport open for I/O devices as intended. If this upgrade offering was coming from Handspring rather that 3rd party, I would be on it today. I can see myself in the bind or getting the upgrade, then having paint issues or something. When handspring swaps, they swap the WHOLE unit, not parts.

Registered: Oct 2000
Location: Aberdeen, SD
Posts: 2531

Re: More memory is REALLY needed, but this is the wrong implimentation

quote:

---

Originally posted by george_vc
...When handspring swaps, they swap the WHOLE unit, not parts.

---

But they send you the good one first, then you're on the honor system to send back the defective one. If you don't they charge your credit card the cost of a new one. So for the time you have both units you can switch parts from one to the other -- just so you don't break 'em both . I tried that with the replacement prism because I like the old paint job (even wearing off) better because of the smoothness. I wasn't able to switch cases because prism parts are soldered to the case and it just so happens that I draw the line of screwing around at soldering. I called HS and asked if they could just repair mine and send it back to me, but they have no way of doing that. It's too bad. I think the replacement paint job looks and feels cheaper (even though the old one was wearing off). I wish HS offered a bit of customization with repairs, e.g. free replacement under warranty, but $x to keep your current configuration and have HS repair the faulty HS equipment -- third party equipment to be repaired by original company. That sort of thing. I suppose that just leads to complications, but it would be nice.

__________________
-Joshua
Abortion: Darwinism at its finest.

Registered: Dec 2000
Location:
Posts: 120

Well, okay, but even if the tech's conversion is only warranted for 30 days, what does he charge to repair other items? I dunno, even after 30 days with a brand new Prism, if you flat drop or abuse the unit, even Handspring won't replace it. (Will they?) But, to be real, heck, let's say it's 8 months and you drop, kick, break through negligence, etc. I mean, Handspring isn't going to replace THAT free of charge, are they? So, we're getting to a software issue. So, you have your Prism converted, and it suffers a software problem, or software/button problem, what would (what's his name? The conversion guy?) he charge for the repair? Does he repair units after the 30-day period? Is it worth asking?
(Read his reviewers, quite a few said their units were returned with buttons fixed, etc., without the owners even asking!) Whaddya think?

Registered: Feb 2001
Location:
Posts: 34

sounds great to me but i emailed him and have looked for a phone number.......... to no avail. whats the secret?
I just want to have a 2 minute conversation..... at least an email response......

Registered: Oct 2000
Location: Here
Posts: 213

I think you have to be careful not to take a volkswagen and build it into a race car, when you finlally get done, you wish you would have bought a race car instead. The Prism in my opinion is a excellent piece of equipment, and I would LOVE more memory, but you know, when you do all of that the new model comes out that has that and more. My strategy is, I buy the best that technology has to offer, and as you transition to new products, sell your's on eBay before the bottom falls out and upgrade. Even though I would like memory, I will wait until the brink of the new product release and sell as fast as I can. Shoot, I'm already 4 months into this Prism. Just my opinion, and I'm sticking to it.....unless I change my opinion. : )

Registered: Jan 2001
Location: Seattle, Washington
Posts: 293

So is there any sticker or anything that can make Handspring knows if my prism case was opened?

__________________
Have A Good Day!
I Love My Prism!

Registered: Sep 1999
Location: San Francisco, CA
Posts: 431

quote:

---

Originally posted by george_vc
I think you have to be careful not to take a volkswagen and build it into a race car, when you finlally get done, you wish you would have bought a race car instead...

---

Registered: Feb 2001
Location:
Posts: 34

exactly my sentiment 8mb is not enough...i keep a huge schedule going back to 1994 for reference purposes. and after my word and excel doc for references and my kid pictures im all maxed out.........its seems like the prism doesnt like to be full. less than 1mb free and i get fatal errors......

still waiting for an email from fort lee , nj
or a phone number if anyone has it........

Registered: Dec 2000
Location:
Posts: 32

quote:

---

Originally posted by george_vc
I think you have to be careful not to take a volkswagen and build it into a race car,

---

Registered: Oct 2000
Location: Aberdeen, SD
Posts: 2531

quote:

---

Originally posted by akur
So is there any sticker or anything that can make Handspring knows if my prism case was opened?

---

__________________
-Joshua
Abortion: Darwinism at its finest.

Registered: Jan 2001
Location:
Posts: 22

quote:

---

Originally posted by razorpit


Does no one know of the GTi?

---

Registered: Nov 2000
Location:
Posts: 69

My prism is in his hands as we speak. Once I placed my order communication was established and questions were answered. This was before my money or unit was received. I am sure this guy is blasted with tons of emails asking the same questions over and over. His focus should be on the people who are serious. As for quality of work a feedback page is provided along with emails. Remember guys its about who has the latest and greatest toy. If you are afraid of voiding your warranty go back to a DayRunner. There will always be someone out there who can and will repair your units - yes at a price.

Registered: Feb 2001
Location:
Posts: 34

ricco, point well taken.
he is probably a very busy guy.

Can you tell us how long he said it will take?

any other tidbits of information he may of told you to make you feel at ease that you were not going to get a bunch of FATAL errors?

Registered: Nov 2000
Location:
Posts: 69

Bimmerbusa - He started working on my upgrade the day he received it ( Feb 16). I anticipate it back to me by Monday the 26th ( I used my Business CK). PayPAl is nice but you can only use 1 credit card and this is a business expense. It seems that most problems that occur are minor and anything important is added to the FAQ page. I will keep you posted. Rico

Registered: Sep 1999
Location: at work...
Posts: 736

quote:

---

Originally posted by ricojrossi
Bimmerbusa - He started working on my upgrade the day he received it ( Feb 16). I anticipate it back to me by Monday the 26th ( I used my Business CK). PayPAl is nice but you can only use 1 credit card and this is a business expense. It seems that most problems that occur are minor and anything important is added to the FAQ page. I will keep you posted. Rico

---

No wonder Rico's so gung-ho about this -- if it breaks, he can always write off the cost of a new Prism as a 'business expense'!

Registered: Feb 2001
Location: MA
Posts: 3

You can all save your money

If you go to your local compusa you can buy some EDO ram that is 8mb for $30 and it fits over the curent ram chip and it will expand the memory I have not done it yet but will very soon

Registered: Jan 2001
Location:
Posts: 22

You mean it works in parallel? I don't see how that would work - can you provide a link on it? I would think the addresses for bits would be all screwed up. -?!?-

Registered: Feb 2001
Location:
Posts: 12

Tony Rudenko

I have used Tony's service twice (PalmV and m100). Turnaround was under a week and both items worked flawlessly. The V was done about two years ago and it's still going strong.

He has a great rep around the web and is very professional. I actually met him on the first exchange. He's an engineer by trade so he knows what he's doing.

I may go to 16 Mb on my Platinum,if I do I will definitely use him again.

Once you actually request a repair order, he will be in contact, like a previous post said, he must be inundated with emails.

good luck!

Registered: Nov 2000
Location:
Posts: 56

Re: Tony Rudenko

quote:

---

Originally posted by bluloo
I may go to 16 Mb on my Platinum,if I do I will definitely use him again.

---

__________________
<i> If it's worth doing, it's got to be done right now.</i>

Registered: Feb 2001
Location:
Posts: 12

platinum upgrade

I think he can do the Platinum as well. His FAQ's refer to the prism and platinum using the same dragonball processor. I just emailed him to be sure.

I'll post whatever response I receive.
cheers