rduggan
Member
Registered: Mar 2001
Location:
Posts: 1 |
I just got one of these the other day. I'm quite impressed. I'm using it with my Prism, and the color really helps, especially in the browser apps.
First of all, I got it for $106 w/ free shipping (free shipping offer now expired) from http://www.buy.com.
Now, to the good stuff:
It's pre-loaded with MultiMail SE 1.0, AvantGo 3.3.350, funSMS 2.0.1.33, FileMover 1.2 (more on that later), plus a SpringPort test utility. A 18" cable attaches between the module (which itself is very light and adds only about 1/8" thickness to the Visor) and the phone.
The first three apps are pretty neat, with this version of AvantGo supporting full online web browsing (albeit limited by the usefulness of 160x160 resolution).
The biggest benefit to me is that the unit appears to have about 1MB of flash. Unfortunately, only 28K is free when you get the unit. However, you can easily move one of the big apps into memory (I already had AvantGo, so I just deleted it from flash). Now, you can use the extra space as backup. (While the unit appears to have 1MB of flash, only 655KB is available to the user. I suspect the rest is firmware/drivers for the device itself.) [Late update: Actually, there is about 950K available. There were some hidden files I didn't spot before.]
I also have the Matchbookdrive, which has the one weakness of not being a true Springboard. That means if you fully back up your Visor onto it, and have to hard reset, you have no way of recovering until you can reload FAFileMover. But with my new setup, I've moved FAFileMover and its drivers onto the Xircom, so I now have the ability to recover from a hard reset by first popping in the Xircom, then the Matchbookdrive. Probably not for everyone, but it works for me.
As to the speed, I believe it's 9600bps, which isn't blazing by any means, but is adequate to pick up short email & for limited web browsing. I've started using Bluelark's Blazer browser (whew!) which has a WAP mode optimized for handhelds with low bandwidth.
The device is really simple to use. I was up and running within 10 minutes of taking it out of the box, and the biggest problem was that I had to call Powertel to enable data service. At least in Powertel's case, you need to have your own dial-up ISP.
All in all, it's a fairly inexpensive solution for those who already have a GSM phone and who don't want to shell out the bucks for a VisorPhone.
-rick
Last edited by rduggan on 03-22-2001 at 02:44 AM
|