![]() |
Show 20 posts from this thread on one page |
VisorCentral.com (http://discussion.visorcentral.com/vcforum/index.php)
- How To / Troubleshooting (http://discussion.visorcentral.com/vcforum/forumdisplay.php?forumid=2)
-- Knowledge Gained - for anyone wondering about their Visor's innards. (http://discussion.visorcentral.com/vcforum/showthread.php?threadid=8367)
Just a few notes on how the Visor is set up internally. I composed these after spending some major time playing with things to get a piece of graphite out and then getting it to HotSync again.
1) There are 4 screws on the outside of the Visor, all on the back. Two are hidden below the Springboard module or the little fill-in thing. On my Visor, only three of them would come out.
2) Once inside, you will see that the Visor is composed of 4 boards (one is hidden behind the board labeled "HANDSPRING ASSY").
3) The board labeled "HANDSPRING ASSY" appears to be the motherboard. There are components on both sides. The Dragonball processor appears to be behind the 1cm (or so) chip that's all by itself in the lower-left. There are two screws through this board, and their tightness affected whether I could HotSync on my Visor.
4) The board labeled "HANDSRING BUTTON BD." houses 7 metal contacts for the hardbuttons. It also houses the HotSync connector and the battery connectors. The backup battery used to keep your data intact when you change batteries is also on this board, so disconnecting it is equivalent to a hard reset. It has a small white connector on the bottom that matches up with a connector on the motherboard. It's impossible to take this out unless the batteries are out.
5) The unlabeled board on the screen side of the case seems to house all the display and touchscreen stuff. It's connected to the motherboard by an orangish ribbon cable that's pretty easy to reconnect.
6) On the underside of the motherboard is a subboard. It appears to house some extra components they couldn't quite fit on the motherboard.
I hope this helps someone in the future. If you have anything to add (no flames please, I'm not claiming to be an electrician or 31337 hardware hacker) reply to this thread.
__________________
<img src="http://www.handspring.com/products/visorprism/images/PrsmLgPct02.jpg" align="left" width="115" height="115">Brent Dax
[email protected]
Visor Prism, USB recharging cradle, Win2K
I wish I could post from AvantGo...
<B><-- Cobalt Blue is really cool!</B>
quote:
Originally posted by Brent Dax
4) ...The backup battery used to keep your data intact when you change batteries is also on this board, so disconnecting it is equivalent to a hard reset...

__________________

God bless America, my home sweet home...
I don't know how a capacitor could possibly resemble a battery since the technical definition of a battery is two or more power cells, and there is only one capacitor.
quote:
Originally posted by HostileJava
...how a capacitor could possibly resemble a battery battery since the technical definition of a battery is two or more power cells...
, a capacitor "can" could look like one of those little button batteries like you find in watches.
__________________

God bless America, my home sweet home...
He's right, actually. A AAA is not a battery, it's a cell. That's why Radio Shack sells EnerCells, not EnerBatteries. A battery is a combination of more than one cell (power-storage area) - a car battery is a battery (it has about a dozen cells, if memory serves), while a AAA is not. We just use battery because cell is overused - there are table cells, biological cells, prison cells, and all sorts of other cells.
__________________
<img src="http://www.handspring.com/products/visorprism/images/PrsmLgPct02.jpg" align="left" width="115" height="115">Brent Dax
[email protected]
Visor Prism, USB recharging cradle, Win2K
I wish I could post from AvantGo...
<B><-- Cobalt Blue is really cool!</B>
quote:
Originally posted by Brent Dax
...it's a cell...

__________________

God bless America, my home sweet home...
So when does a battery actually become a battery, AA, C, D 9V?
BEN
It's the memory board
quote:
Originally posted by Brent Dax
6) On the underside of the motherboard is a subboard. It appears to house some extra components they couldn't quite fit on the motherboard.
__________________
"When I am Empress...Heads will roll!"
Queen of Parts
A battery is a battery when it has 2 or more cells ie 2 AAA taped together. BTW I think a car battery has 6 cells. It's 12.6v so and rechargable cells are 2.1v, if you take the caps off to fill them with distilled water you can see them.
Actually this is the "memory board". One for the 2 MB version and another makes it an 8MB version. First thing I did after getting my Visor Dx was to take it apart
Is this just a memory board, or is it what is called a "card" in Palm parlance (which contains both RAM and ROM).
If it's a card, then this is probably card 0, meaning it's the base memory and the OS ROM. This could make for a "simple" hardware upgrade whenever Handspring's version of 3.5 becomes available.
Shoot. Now you've got me curious. Where's that screwdriver. 
__________________
It's gotta be weather balloons. It's always weather balloons. Big, fiery, exploding weather balloons.
-- ComaVN (from Slashdot)
quote:
Originally posted by BEN
So when does a battery actually become a battery, AA, C, D 9V?
__________________
<pre> ^<br> /_\ WINCHELL CHUNG Nyrath the nearly wise at the Praeternatural Tower<br> <(*)> [email protected] http://www.ProjectRho.com/home.html<br>/_/|\_\ ABSIT INVIDIA VERBO IDEM SONANS<br> //|\\ -------------------------------------------------------------------<br>SURREAL SAGE SEZ: I'm nobody. Nobody at all. But the secrets of the<br>universe don't mind. They reveal themselves to nobodies who care.<br></pre>
That's right because non-rechargeable cells are 1.5v and 1.5*6=9
[Edited by HostileJava on 10-02-2000 at 11:51 AM]
| All times are GMT. The time now is 02:48 AM. | Show 20 posts from this thread on one page |
Powered by: vBulletin Version 2.3.4
Copyright © Jelsoft Enterprises Limited 2000 - 2016.