![]() |
Show 20 posts from this thread on one page |
VisorCentral.com (http://discussion.visorcentral.com/vcforum/index.php)
- How To / Troubleshooting (http://discussion.visorcentral.com/vcforum/forumdisplay.php?forumid=2)
-- Nokia 5100 Series to Visor (http://discussion.visorcentral.com/vcforum/showthread.php?threadid=10487)
I know its possible, but I dont know how yet
Can someone explanin how or wear I can buy/build a connection from my Nokia phone to my visor for wireless net? I just got a cellphone and remembered my sadness for now being able to afford a Minstrel, this would be great...and I got voice to! Thanks all...
-Brian
__________________
Push Any Key To Start
"Wheres the Anykey?!"
-Homer Simpson
My experience
Hi Brian!
I made several experiments to connect Visor to Nokia phones. Due to N51XX & N61XX phones have no built-in modems you have to use modem simulation SW (I used TDK Global Pulse downloaded from TDK site). In addition to I made serial cable to connect mobile to Visor (schematic is extremely simple: Visor's Tx pin to Nokia's Rx pin and vise versa). The only problem for me was absence of Visor's native connector. I made my own but it was unreliable. As temporary solution I used free serial pins of standard USB cradle. After that I was able to browse internet, receive and send SMS etc. One thing - after TDK Global Pulse installed and activated I was unable to turn it off
(( It blocked built-in IR port so I couldn't use such applications like Omni Remote... After all I remove Global Pulse
))
IMHO it's much easier to use phones like N7110 which have built-in modem and right version of IR. Although usinng Visor's phonebook with wire connection and hands-free is convenient
))
If any further questions - please don't hesitate to ask.
Best regards,
Dmitri.
| All times are GMT. The time now is 02:59 AM. | Show 20 posts from this thread on one page |
Powered by: vBulletin Version 2.3.4
Copyright © Jelsoft Enterprises Limited 2000 - 2016.