VisorCentral.com (http://discussion.visorcentral.com/vcforum/index.php)
- Springboard Modules (http://discussion.visorcentral.com/vcforum/forumdisplay.php?forumid=10)
-- I orderd my OmniSky (http://discussion.visorcentral.com/vcforum/showthread.php?threadid=9122)

Omnisky charges with new Prism cradle?

I thought it was reported above that it did not charge on the Prism cradle?? Which is true??

__________________
Thanks,
[email protected]
TreoCentral.com
Product Page Editor

Question

Does Omnisky offer a $400 dollar a year service plan? I thought I had read that..but not sure. Also, if there is only the $40 a month with no Yearly service plan, is it all worth the $480 a year? Its very pricey, but if its worth it, i'll find a way to scrap up the cash... Thanks.

-Brian

(P.S. Does it crash ALOT? That seems to be the case from some posts.)

[Edited by BrianX124 on 11-09-2000 at 04:31 PM]

__________________
Push Any Key To Start
"Wheres the Anykey?!"
-Homer Simpson

Color Support

Here's the message I got back from Omni support on the color support. Color only indirectly through AvantGo:

At this time we do not have any information available as to when the
OmniSky browser will support color. You may however use an alternate
browser with the OmniSky service such as AvantGo that will support
color.

If you have any questions, please don't hesitate to contact us at (800)
860-5767 or online at http://www.OmniSky.com.

Thank you,
Melanie
OmniSky Support

Just received mine

Got mine in this afternoon, and had no problems at all installing or running it. It also works flawlessly with my Mindspring POP account.

I'll continue testing it and post more later.

__________________
Tim Kelly
www.dietryin.com
www.bushlite.net

Visor Phone compatable cradle?

mxgian,

You referred to the above cradle. Is this something to be released later? I'm not aware.

Re: Omnisky charges with new Prism cradle?

quote:

---

Originally posted by Intysoft
I thought it was reported above that it did not charge on the Prism cradle?? Which is true??

---

__________________
Moose Man
I may be from the LEFT coast but that's not the correct political view in my mind!

Just a curious newbie

Hey, I know I'm new to this, but I have been reading these posts to find out about the Minstrel S modem for my Prism and I was wondering something:

There was a post by some doc and another from someone else about ignoring what he said or something like that. But I read his stuff from another part of this board and his information seemed good to me, but when he tried to talk about the modem here, no one seemed to care, even though he seemed to have some good info and no one seemed to have it here yet.

Did I miss something? Like I said, I'm new, but if there was something that was done wrong, I just don't want to end up on the wrong end of the silent treatment -especially since I rely on others for help all the time.

Don't know what is wrong with the Doc...

I know what you mean about the person who thinks we are ignoring him, but someone did post a message to him and I actually sent an email to him with some questions but I have not gotten a response.

Maybe he is some alternate universe

Strange lockups?

Hi,
Is anyone with a Prism and Minstrel S modem experiencing any weird lockups?

Just yesterday, I kept the Minstrel application open to check on the signal strength differed from place to place. I then noticed that there was no activity on the screen and after further investigation, I found that the device locked up and required a soft reset.

I've been experiencing these kind of lockups every now and then and it is hard to repeat them.

Ron

Lock ups

I've gotten a fatal error when trying to shut down the Minstrel Modem Manager using the Shutdown button within the app. Of course I try it again now and it works, no problem. I have also had problems within the Avantgo app. I get stuck within the channel manager page and can't get out. This never happened before getting the modem.

RE: Lockups

Yes. I got that fatal error last night and a soft reset would not fix the problem. When I attempted a soft reset, I would get the a flickering version of the startup screen. I ended up having to restore from my backup module.

I asked OmniSky if they knew of any lockup issues and the person told me that there were some occurances but nothing major. I think we need to let them know. I started by sending them an email of the lockup I mentioned in my last post.

Ron

Good pic of Visor w/ Minstrel S from top

http://www.go2mac.com/images/handsp...or_top_down.jpg

Here's a picture that gives you a good idea of the modem's size.

I got it... & sending it back!

Hi,
I got it today to use with my new platinum. Followed the instructions. Charged it for 3hours till the green light stoped blinking and BOW!!! It keeps saying that the battery is dead. I called Omnisky and they are sending me a new one. Let's see what happens....

__________________
No matter where you go. There you are.

I got mine today too. Couldn't connect. The mistrel app said i had registration error. called omni. pretty quick pick up after the voice mail maze. Gave them my IP address they requested. went on hold. After hold, was told AT7T support wasn't answering. Will have to wait until tomorrow to get the ip "reset."


Software question. I set up using CD and apparently it installed a couple of app on the prisim. But now, I get the same app when i plu in the modem. Can I delete the one on the prism?

Hardware question. Does the modem have 2 megs of mem? If so, how can i access it?

TIA.

__________________
Felipe Garcia
Happy Treo 600 user, so far. Thanx Cingular for having an unlocked phone.

My Treo 600 is my phone, my PDA, my watch, and my MP3 player. Oh yeah, I take a picture once in a while with it. Convergence is such a great thing.

Software from CD

I was told that the software on the CD was not really necessary since the applications install automatically from the modem. The person I spoke to said the CD software is there in case something goes wrong with the installation from the modem...

Ron

Network settings from OmniSky Support

Hello all,

I got the following from an OmniSky support agent in response to my complaint that my device locks up in the Minstrel application. I suggest that you take the modem out before you follow the instructions. I didn't and the modem would just get stuck in the Sign On screen... In my case, I just remove the changes and followed the instructions word for word. Here they are:

************************************
If you have been experiencing some problems connecting or getting web content on your Omnisky unit, you may be missing something. Please check your Network Preferences to make sure that you have an updated script. This script helps the modem to be in the right mode to access the network properly. Take these following steps and you will be best suited to access the network when finished. If you already have this updated script, your may be experiencing other network problems.

1. Turn on the palm unit. (with or without modem; preferably without)
2. Tap on the icon labeled "PREFS".
3. "GENERAL" will appear in the upper left hand corner.
4. Tap on the "GENERAL" and choose "NETWORK" from the menu.
5. Then choose the "DETAILS" option from the bottom right.
6. Next tap on the "SCRIPT" option at the bottom again.
7. Your script should appear as follows:

Delay: 1
Send: AT\\APPP
Send CR:
Wait for: 1
End:

8. If this is what your script appears as, change to the following:

Delay: 1
Send: ATE0V0
Send CR:
Send: AT\\APPP
Send CR:
Wait for: 1
End:

9. Tap "OK" at the bottom twice to get back to the "NETWORK
PREFERENCES".
10. Then perform a soft reset.
11. Attach the modem and sign on in Minstrel.
12. From here you should get three check boxes and a more reliable
connection.
AIM preferences should be:

1) Tap on Pref's icon on the Palm
2) Tap on Network in the upper right hand corner

* Service should be minstrel, user name is blank, password should be
<prompt>, connection should be minstrel

Hopefully this will alleviate your problem.
If you have additional questions, please feel free to contact us at
(800)860-5767 between 5 AM and 8 PM PDT, or by visiting our website at
http://www.omnisky.com.

********************************

Hope this helps...

Regards,
Ron

Platinum and Minstrel S

I received my VPL on 11-7 and my Minstrel S on 11-9.

My VPL is tightly constructed and the glass is real snug. Also, it's clearly faster than my VDX. Now for the modem. Installation was a breeze. However, I have add to reset three or four times due to "Fatal Errors". The errors only occured when inserting or removing the modem, so before I remove the modem I go to the Minstrel Icon and perform a shutdown. So far I haven't seen any more fatal errors and haven't had to reset my VPL. In addition, removing the Minstrel from my VPL is kind clumsy...wish it had a release lever like PCMCIA card slots on laptops. OmniSky service is great. Navigation is simple and content is easy to get to. Lastly, when the Minstrel is attached to my VPL I can still send and receive beams, where as Palm Vx users must remove their modem to send and receive beams.

dg

Continued issues

I have continued to have issues with the OmniSky/Minstrel. I have experienced Fatal Errors every 5-10 pages and have had my entire Prism wiped twice. Hint: Buy Backup Buddy. I went through all the setting of connection pref's and Minstral settings. No help. With Tech Sppt on the line it continued to lock continuously. I was on the line with OmniSky until 2am on Friday. They were great as far as Tech Sppt goes, but I am still waiting on a response from them as to my next steps.

More as the plot thickens...

I have Minstrel S with Prism using Omnisky. I am happy with it. Would be nice if Minstrel S is slimmer etc but that is best they can do. Better than the bigger Minstrel hardware I had on Palm IIIx.

Would be nice to have Omnisky software in color but I believe they are working on it. That Omnisky software is similar to Palm VII web clipping application and it really works good as the data is very compact allow for quicker downloading to Prism. I tried all Internet applications on Minstrel S/Omnisky and all of them work very good except AOL software.

http://www.aol.com/anywhere/aolforpalm/home.adp
is where I got AOL software for Prism. When I click on Instant Message icon, it proceed to dial out and it really tries to dial/send phone nbr to Minstrel S and it was
stuck at that point. I tried everything I could to get AOL software to work with Minstrel S but I could not.

Any tips to get AOL software to work with Minstrel S?

Thanks

quote:

---

Originally posted by jclark93
I have Minstrel S with Prism using Omnisky. I am happy with it. Would be nice if Minstrel S is slimmer etc but that is best they can do. Better than the bigger Minstrel hardware I had on Palm IIIx.

Would be nice to have Omnisky software in color but I believe they are working on it. That Omnisky software is similar to Palm VII web clipping application and it really works good as the data is very compact allow for quicker downloading to Prism. I tried all Internet applications on Minstrel S/Omnisky and all of them work very good except AOL software.

http://www.aol.com/anywhere/aolforpalm/home.adp
is where I got AOL software for Prism. When I click on Instant Message icon, it proceed to dial out and it really tries to dial/send phone nbr to Minstrel S and it was
stuck at that point. I tried everything I could to get AOL software to work with Minstrel S but I could not.

Any tips to get AOL software to work with Minstrel S?

Thanks

---

__________________
Felipe Garcia
Happy Treo 600 user, so far. Thanx Cingular for having an unlocked phone.

My Treo 600 is my phone, my PDA, my watch, and my MP3 player. Oh yeah, I take a picture once in a while with it. Convergence is such a great thing.