VisorCentral.com - prism cradle/ prism II?

Show 20 posts from this thread on one page

VisorCentral.com (http://discussion.visorcentral.com/vcforum/index.php)
- Visor Prism (http://discussion.visorcentral.com/vcforum/forumdisplay.php?forumid=19)
-- prism cradle/ prism II? (http://discussion.visorcentral.com/vcforum/showthread.php?threadid=20587)

Posted by Samgovol on 01-04-2002 12:02 AM:

prism cradle/ prism II?

I am thinking about upgrading my Platinum to a prism. Is it possible to hot sync a prism in a non-prism cradle (i.e. my platinum cradle). Also any rumors about a release of a new prism (prism II)?

Posted by gadgetguru on 01-04-2002 03:32 AM:

The Prism is thicker than the Platinum and will not fit in the
Platinum cradle unless you jam it down and hold it there during
the hotsync. Also, the Platinum cradle will not charge the Prism.

__________________
Rick

www.visorsolutions.com

Posted by freitasm on 01-04-2002 09:40 PM:

Re: prism cradle/ prism II?

quote:
Originally posted by Samgovol
I am thinking about upgrading my Platinum to a prism. Is it possible to hot sync a prism in a non-prism cradle (i.e. my platinum cradle). Also any rumors about a release of a new prism (prism II)?

But fear nothing! Just hotsync your old one, plug the new one, and everything will be moved into the new device on the first hotsync!

Posted by JazeeJ on 01-05-2002 08:25 PM:

I'm assuming that you do have a cradle for your prism. If so, then there is no need to try and put your prism in the platinum's cradle. Just hotsync the platinum in it's cradle ...... unplug the platinum's cradle..... then plug up the prism's cradle and hotsync......all of the data that was on your platinum should now be hotsynced to your prism. I did this when I upgraded from my Visor Deluxe to my Visor Prism....

__________________
That's right I'm Bad!!!!!!

Posted by zipperhead on 01-10-2002 12:15 AM:

Try the oter way arround !

I can Hotsync my Visor Deluxe in my Prism's cradle. Same should be true for your Platnum.

__________________
If you zoom in on the dot on your GPS, does it say "You are here" ?

Posted by fivedime on 01-18-2002 05:25 AM:

Re: Try the oter way arround !

quote:
Originally posted by zipperhead
I can Hotsync my Visor Deluxe in my Prism's cradle.

Do you unplug the power cable when you do this? Otherwise I would think you are asking for some kind of trouble for the Deluxe...

__________________
That's what I wanna mean!

Posted by gadgetguru on 01-19-2002 02:17 AM:

You don't need to unplug the power cable. The Plat's batteries
are not rechargeable and the VDOCK pin does not go to the
batteries. It can be used to charge a rechargeable springboard
module thru the Deluxe, Platinum, Solo, and Neo as well as all
of the rechargeable Visors. Just plug in your Prism cradle and
sync your Platinum, then change the conduit settings to Desktop
overwrites handheld and then sync the Prism. You'll be all set.

__________________
Rick

www.visorsolutions.com

All times are GMT. The time now is 01:04 AM.

Show 20 posts from this thread on one page