VisorCentral.com - Blackened Buttons

Show 20 posts from this thread on one page

VisorCentral.com (http://discussion.visorcentral.com/vcforum/index.php)
- Visor Edge (http://discussion.visorcentral.com/vcforum/forumdisplay.php?forumid=25)
-- Blackened Buttons (http://discussion.visorcentral.com/vcforum/showthread.php?threadid=25342)

Posted by Hoser_back_home on 08-05-2002 11:55 PM:

Blackened Buttons

Barely a few days after i got my edge (back in march or april) i noticed that the scroll buttons (or is it just a button...one piece) turned a blackish colour from what i'm guessing was the sweat on my fingers!

it looks alot like tarnished silver which is odd considering that they probably use some stainless steel alloy. None of the 4 app buttons have done this, just the 'up/down' button(s).

anybody else? anybody know of a way to remove this tarnish without having to rinse my edge afterwards?

__________________
Ever feel like the train left while you were busy reading the paper?

Stealth-Mod.

Posted by edgenut on 08-06-2002 02:12 AM:

Don't know

Strange, how stainless steel would do that, have you got it wet or somthing?

__________________
I'd Rather be Diving.......(with my PDA of course)

Check out my forum @ http://groups.msn.com/PDAPocketPCForum

Posted by TexSkater9140 on 08-06-2002 03:53 AM:

that happens to most of the edges.
it happened to all the buttons on mine
its not a big deal, it looks better too(i think it does)
-alex

__________________
The Untouchables will live on!!
Best viewed using Internet Explorer

Posted by DGLewis on 08-06-2002 01:14 PM:

Tarnish removal

"Silvo" Silver Polish wadding - it removes the tarnish.

Posted by Toby on 08-07-2002 10:39 AM:

Re: Blackened Buttons

quote:
Originally posted by Hoser_back_home
[...] it looks alot like tarnished silver which is odd considering that they probably use some stainless steel alloy. None of the 4 app buttons have done this, just the 'up/down' button(s).

anybody else? anybody know of a way to remove this tarnish without having to rinse my edge afterwards?

After not having this problem for quite a while, I noticed yesterday morning that I was starting to see a little bit of blackness on the up/down button. I took some silver polish/tarnish remover to it, and it came off. It says to 'rinse' on the container, but I just used the included sponge wringing it as dry as possible before use. Also, I doubt that it's stainless steel. Nickel plating would be believable.

Posted by Hoser_back_home on 08-07-2002 06:32 PM:

thanks for the suggestions.

i'll give the polish a try (if my polish was made in Poland, would it be Polish polish? )

__________________
Ever feel like the train left while you were busy reading the paper?

Stealth-Mod.

Posted by EJSHUMAK on 08-09-2002 11:02 AM:

Wear off completely too???

I thoought I read a post on the finish actually coming off-- leaving black buttons -- Anyone else hear of this??? Or experience it??

Posted by Toby on 08-09-2002 01:44 PM:

Re: Wear off completely too???

quote:
Originally posted by EJSHUMAK
I thoought I read a post on the finish actually coming off-- leaving black buttons -- Anyone else hear of this??? Or experience it??

Don't recall ever hearing of it, and I've never experienced it. Of course now by saying this, I'm ensuring that, in a week or two, the finish will start wearing off my buttons.

Posted by EJSHUMAK on 08-12-2002 11:34 AM:

And/or finish coming off--

I found the post -- it's on the Palm Info Center site--
Maybe the finish can wear all the way off-- Doesn't look like anybody is real sure here though---

http://www.palminfocenter.com/forum...p?TOPIC_ID=6113

Posted by rimshaker on 08-13-2002 05:59 AM:

Well.. after reading this thread, decided to clean my buttons. Simply used brass polish (for belt buckles, etc.) and kleenex. Worked like a charm... all you need is a very small amount on each button and buff to a bright polish. I was surprised at how much film and oil were actually there. The kleenex clearly turns black from all the dirty layers. Now i can literally see very detailed reflections!

All times are GMT. The time now is 07:16 PM.

Show 20 posts from this thread on one page