VisorCentral.com - Edge Springboard module in a Vdx

Show 20 posts from this thread on one page

VisorCentral.com (http://discussion.visorcentral.com/vcforum/index.php)
- Springboard Modules (http://discussion.visorcentral.com/vcforum/forumdisplay.php?forumid=10)
-- Edge Springboard module in a Vdx (http://discussion.visorcentral.com/vcforum/showthread.php?threadid=16057)

Posted by Burns on 06-14-2001 03:18 PM:

I may be jumping the gun a little here (since I haven't seen a single Edge SB come out yet) but has anyone thought about the implications of the Edge haveing a smaller SB slot? When/if companies start making the smaller slot SB's they won't be compatable with any of the previous Visors.

So, here's my thought. I'm guessing that Handspring kept the SB specifications the same for the Edge, just smaller. So some company should make a conversion module. Take a SB module, throw in an Edge SB receiver and voila (sp?) you've got yourself an Edge SB compatable Visor.

Of course, this is assuming that companies come out with new technologies in the Edge SB's, not just repeats of larger SB's. And then there is the price factor. While I think something like this should cost around $40 or $50, companies will probably market it for more around $80 - $100.

Anyway, that's my thoughts.

- Burns

__________________
Check out my page on Visors:
Burn's Visor page

Posted by septimus on 06-14-2001 03:20 PM:

Handspring sells their edge-->Springboard adapter for 19.99. Presumably, doing the exact same thing in reverse shouldn't cost much more. Of course, that's assuming there will be any demand for such a thing...

__________________
Don't like somebody? Click "Profile" on a post and then click "Ignore "so and so's" posts". Voila!

Posted by Toby on 06-14-2001 05:44 PM:

quote:
Originally posted by Burns
[...] So, here's my thought. I'm guessing that Handspring kept the SB specifications the same for the Edge, just smaller. [...]

"Not exactly" - Hertz commercial

The Edge connector has all of the capability of the SB slot, but not vice versa. There are signals in the Edge connector that the Springboard slot can't handle currently.

Edge connector pinouts on page 10.
Springboard pinouts on page 47.

Sorry.

Posted by chucm on 06-15-2001 12:14 AM:

Now I'm confused.

My understanding was that the Edge Springboard adapter actually only contained a "full size" Springboard slot hanging on the back of the Edge so that standard Springboard modules - like the Visorphone - could be used in the Edge.
- Am I totally wrong?
- I suppose that some company COULD design a "small springboard module" that fit in the Edge slot.
-- but where would they put the guts of the device. They would have to hang on the back anyhow - the slot is so narrow.
-- also - why would they want to? That would severely limit their potential market.

Posted by mnartker on 06-15-2001 10:13 PM:

Re: Now I'm confused.

quote:
Originally posted by chucm
- I suppose that some company COULD design a "small springboard module" that fit in the Edge slot.
...
-- also - why would they want to? That would severely limit their potential market.

Yeah, especially if HS having trouble unloading their Edges as hinted to by their trade in program.

Posted by Toby on 06-15-2001 10:19 PM:

Re: Now I'm confused.

quote:
Originally posted by chucm
My understanding was that the Edge Springboard adapter actually only contained a "full size" Springboard slot hanging on the back of the Edge so that standard Springboard modules - like the Visorphone - could be used in the Edge.
- Am I totally wrong?

Nope, you're just confusing the original posters question. He's asking for the opposite of the Edge Springboard adapter (a module that slides into a VDx/Pl/Pr which gives it an Edge connector).

quote:
- I suppose that some company COULD design a "small springboard module" that fit in the Edge slot.

I wish someone would, preferably in the same anodized aluminum as the edge and with a built in flipcover for the screen.

quote:
-- but where would they put the guts of the device. They would have to hang on the back anyhow - the slot is so narrow.

No doubt, but I'm sure that it could be slimmed down a bit more than the current design.

Posted by septimus on 06-15-2001 10:27 PM:

Re: Re: Now I'm confused.

quote:
Originally posted by Toby
No doubt, but I'm sure that it could be slimmed down a bit more than the current design.

It has been, by removing the plastic casing... I can't remember where I saw it...

__________________
Don't like somebody? Click "Profile" on a post and then click "Ignore "so and so's" posts". Voila!

Posted by Toby on 06-15-2001 10:29 PM:

Re: Re: Re: Now I'm confused.

quote:
Originally posted by dietrichbohn
It has been, by removing the plastic casing... I can't remember where I saw it...

Somebody posted it either here or at PDABuzz. Not an ideal solution, though, IMO.

Update: It was here.

Posted by septimus on 06-15-2001 10:39 PM:

Re: Re: Re: Re: Now I'm confused.

quote:
Originally posted by Toby
Update: It was here.

Thanks, Toby. Still, looks like there should be a better solution. Maybe if the circutry were moved to below the SB instead of between it & the Edge? That would be fine w/ me, I just want it thinner

__________________
Don't like somebody? Click "Profile" on a post and then click "Ignore "so and so's" posts". Voila!

Posted by Usonian on 06-16-2001 12:02 AM:

Not only D'oh, but...

I was also thrilled to see that 'Mullet' has finally achieved official recognition as a word. And yes, it should be D'oh with an apostrophe - maybe it will get listed as an alternate spelling in future editions

For more information about mullets, see http://www.mulletsgalore.com

-Andy

__________________
<br>"Form follows function - that has been misunderstood. Form and function should be one, joined in a spiritual union" -Frank Lloyd Wright

Posted by Toby on 06-16-2001 01:59 AM:

Re: Not only D'oh, but...

quote:
Originally posted by Usonian
I was also thrilled to see that 'Mullet' has finally achieved official recognition as a word. And yes, it should be D'oh with an apostrophe - maybe it will get listed as an alternate spelling in future editions

It took me a couple of seconds to realize you were talking about the hairstyle and not the fish.

All times are GMT. The time now is 06:12 AM.

Show 20 posts from this thread on one page