VisorCentral.com - Visor Flip Cover

VisorCentral.com >> Discussion >> Visor Related >> Accessories
Visor Flip Cover


	Post a New Thread \| Post A Reply

Pages (14): « First ... « 8 9 10 11 12 [13] 14 »

Last Thread Next Thread

Author

Topic: Visor Flip Cover Pages (14): « First ... « 8 9 10 11 12 [13] 14 »

raptor
Member

Registered: Sep 2000
Location:
Posts: 107

quote:
Originally posted by Mark Squires

If you don't mind the snap-on, why?

Personally, I HATE the snap-on. And the snap on for the Prism is even worse than for VDX.

The fact that I don't mind the snap-lid doesn't mean that I love it and think it's all I need. The fact of the matter is that while it's not TOO bad for me to pull the thing off/put it back on, having the Flip-Clip and being able to 'flick-wrist' it open is much easier/cooler.

One may not mind his car painted blue, but that doesn't mean he doesn't want a red paint job.

__________________
-Richard Powell

"Nice guys may finish last, but you know, the company's much better back here."

03-05-2001 12:32 AM

Mark Squires
Member

Registered: Oct 1999
Location: Philadelphia
Posts: 242

Maybe I'm doing something wrong, but with Prism unlike VDX, I can't even put the hard snap cover on the back when I'm using the unit. It doesn't seem to fit.

__________________
Visit the E-Zine on WINE AND ITS Bulletin Board at http://marksquires.com
Available on <a href="http://avantgo.com/channels/_add_channel.pl?cha_id=2733" target="_blank">AvantGo</a>

03-05-2001 03:31 PM

sastian
Member

Registered: Apr 2000
Location:
Posts: 86

keep trying ....

Well the fact of the matter is that the hard cover from handspring WILL NOT fit on the back of the prism. They changed the form factor of the unit by expanding the backside to accommodate the color screen and the lith ion battery. So the cover literally only fits on the face. Try our clip and lid. No more juggling pieces.

__________________
<table border="0" cellspacing="0" cellpadding="3" width="212">
<tr>
<td align="right" valign="top" width="38"><img src="http://www.tactilis.com/images/t-icon.gif"></td>
<td nowrap align="left" valign="top" width="174">Tactilis 
Hands On Thinking 
 <a href="http://www.tactilis.com">www.tactilis.com</a>
</td>
</tr>
</table>

03-05-2001 03:55 PM

Mark Squires
Member

Registered: Oct 1999
Location: Philadelphia
Posts: 242

Re: keep trying ....

quote:
Originally posted by sastian
Well the fact of the matter is that the hard cover from handspring WILL NOT fit on the back of the prism. They changed the form factor of the unit by expanding the backside to accommodate the color screen and the lith ion battery. So the cover literally only fits on the face. Try our clip and lid. No more juggling pieces.

Well, that's what I thought.
I mean, they got SO much criticism for the snap lid in the first place, you wonder, what could ever POSSESS them to make it even WORSE????

Would love to have your lid.

__________________
Visit the E-Zine on WINE AND ITS Bulletin Board at http://marksquires.com
Available on <a href="http://avantgo.com/channels/_add_channel.pl?cha_id=2733" target="_blank">AvantGo</a>

03-05-2001 06:59 PM

bimmerbusa
Member

Registered: Feb 2001
Location:
Posts: 34

whats going on with the flip lid?
Any release dates yet?????????????????/////

03-16-2001 10:07 PM

timwool
Member

Registered: Dec 2000
Location:
Posts: 11

Sastian
What happened to your web site? I went to place an order and the main page is real old and the order page does not even come up. When will you get the Pay Pal option?

03-17-2001 12:18 PM

FlipCover
Member

Registered: Dec 2000
Location:
Posts: 25

Accepting new orders

We have finally filled all of our pre-production orders and have now begun to accept new orders for our FlipCover and Prism FlipCover.

You can expect a review of these products soon on VisorCentral

Next week we are going to begin taking orders on FlipCover adapters and we will also make an announcement regarding a new adapter that will work on ALL oversized modules.

__________________
<a href='http://www.flipcover.com'> www.FlipCover.com</a>

03-17-2001 05:07 PM

argent
Member

Registered: Jan 2000
Location:
Posts: 391

But what about the Tactilis flipcover?

What about the Tactilis flipcover? I want one that will work with my Omnisky.

__________________
Rev. Peter da Silva, ULC 
<a href=http://www.taronga.com/~peter/>Ar rug t� barr�g ar do mhact�re inniu?</a>

03-17-2001 06:03 PM

espectro
Member

Registered: Feb 2001
Location:
Posts: 8

disappointed

I thought everything was going to work out well with Tactilis regarding my broken flip clip. Someone from the company called me at work and offered both a black and clear clip to make up for my broken clip. He also said that they would throw in another Palm III lid, even though I had said the cracks in the lid were my fault. I was rather impressed. However, three weeks have passed, and there's no trace of my replacement. I had been carrying my visor around in a neoprene marware case without a lid on it, and now there's a small scratch above the graffiti area. Oh well.

03-18-2001 03:29 AM

bimmerbusa
Member

Registered: Feb 2001
Location:
Posts: 34

good ideas,,,,,,,,poor execution???????
they dont answer emails either............

03-18-2001 04:02 AM

google
Member

Registered: Mar 2000
Location:
Posts: 28

Growing pains, but Tactilis backs their words

I complained (whined), some time back that stress cracks appeared on my lid. Shortly after, the hinge peg and leg of the lid broke off after I pulled it out of my notebook bag.

Then and now, "I" caused the stress crack and broke the lid. It was not the products fault. Sastian said they would replace the lid free of charge and did. Granted it took a week or two, but it was a free replacement for something I broke. If if breaks again, I will buy another because it is better than my slipper case, the price is right, looks cool (even for a non-Trekkie), covers the VDx well and is very easy to use vs the old, handspring clam shell clip. But most of all, I realize the business is expanding and with it growing pains, sastian
backs up what he says. Businesses that commit on what they say get my business & hard earned $$.

03-18-2001 06:31 AM

sastian
Member

Registered: Apr 2000
Location:
Posts: 86

New Server = New Bugs... (and eventually New Victories!)

"What happened to your web site? I went to place an order and the main page is real old and the order page does not even come up. When will you get the Pay Pal option?"

The new server is up and running. BUT - there are some issues (hopefully this will explain the email and shipping problems)...

1.) The consultants we are working with weren't able to fully test the site until the domain change took place.

2.) The domain change was effective on Friday and I've been out of town this weekend and unable to login.

3.) The front page is still the snapshot taken from the initial download when the consultants began converting the site. Also, the on-line store page isn't linking and the products page only allows you purchase flip-clips. All of this is being worked on and will be fixed ASAP!!

4.) Our email server login information has changed along with the server. I haven't been able to pick up emails for the past week (this should have already been fixed) and so there are still many unanswered emails. I try to personally look at and reply to each email so I'm really sorry if you haven't heard from us yet. Please look for answers to your emails in the next few days.

5.) Due the problems with the email server, there are some orders that were received that didn't ship in a timely manner. We were able to work around the email process last week and any outstanding orders (including any replacements) shipped on Friday.

6.) Paypal is supposed to become functional with the new site. I'm working to get this linked up and working ASAP!!

7.) The Flip-Lid (delayed) is going into production this week.

The good news is that we're looking at getting a cash infusion that will allow us to hire someone to help us handle the steadily increasing customer service demand that has outgrown the "family" business. Please bear with our growing pains. Our endeavor is to make every customer a happy one. We're truly sorry if we've missed you.

03-19-2001 04:59 AM

yardie
Member

Registered: Feb 2000
Location:
Posts: 1571

Flip-Lid vs Flip-Clip

What is the difference between the flip-clip and the flip-lid? You site doesn't show the difference. More pictures needed on the site.

03-19-2001 05:48 AM

PDAENVY
Member

Registered: Nov 1999
Location: Ann Arbor, Michigan USA
Posts: 790

quote:
What is the difference between the flip-clip and the flip-lid? You site doesn't show the difference. More pictures needed on the site.

The flip-clip is the thing that "hugs" the top of the visor from behind and becomes the "hinge". The flip-lid is a (still unavailable) lid custom-designed to match the Visor.

You can buy the clip and "Palm III reproduction" lids in several colors now. It looks like the custom Visor lid will be available soon.

__________________
Jeff