VisorCentral.com - Network Library Problem

Show 20 posts from this thread on one page

VisorCentral.com (http://discussion.visorcentral.com/vcforum/index.php)
- Communications (http://discussion.visorcentral.com/vcforum/forumdisplay.php?forumid=20)
-- Network Library Problem (http://discussion.visorcentral.com/vcforum/showthread.php?threadid=26103)

Posted by pgroves on 08-22-2002 02:28 PM:

Network Library Problem

I have just bought a visorphone for use here in Australia. Im very impressed with its performance but have one problem. I went to setup my ISP's network settings on my Deluxe and it gives me this error message..."The Network library is not avaliable". I can connect to my mail via iambic mail ok but im trying to setup blazer 1.1. Any help would be appreciated.

Posted by MarkEagle on 08-22-2002 02:31 PM:

Try a soft reset... sometimes that will bring everything back to normal. If it doesn't, try a warm reset. As a last resort, you may need to do a hard reset.

__________________

God bless America, my home sweet home...

Posted by pgroves on 08-22-2002 02:54 PM:

Thanks for the prompt reply Mark. I tried the warm reset with the visorphone in and no joy then i removed it and did a soft one and bingo its back. Your help is greatly appreciated. THANKS

Posted by MarkEagle on 08-22-2002 03:33 PM:

quote:
Originally posted by pgroves
I tried the warm reset with the visorphone in

A good rule of thumb: do not do resets with modules installed. It helps eliminate at least one level of complexity.

__________________

God bless America, my home sweet home...

Posted by mcristia on 08-23-2002 01:35 AM:

quote:
Originally posted by MarkEagle
Try a soft reset... sometimes that will bring everything back to normal. If it doesn't, try a warm reset. As a last resort, you may need to do a hard reset....A good rule of thumb: do not do resets with modules installed. It helps eliminate at least one level of complexity.

I have the network library unavailable issue as well. Except, I do not have a Visorphone. Instead I have a CF Memplug, and a Thinmodem+. Hard reset, warm reset, soft reset, modules in or modules out --- no combination seems to work. Whenever I reset my Visor Pro, I get a Fatal Exception right at the last instant (had same problem with Deluxe). In order to use the device at all when a reset is necessary, I have to be sure to hold down the Up Button during the entiire process, which seems to keep the evil Fatal Exception at bay. Unfortunately, though, I cannot complete the Network setup procedures, so the Thinmodem+ gathers dust, and I cannot sync e-mail during a hot sync operation.

Does anyone have any tried and true advice for this situation?

__________________
MANY BLESSINGS!
Peace and Every Good!

Michael W. Cristiani
[email protected]

Posted by MarkEagle on 08-23-2002 11:35 AM:

quote:
Originally posted by mcristia
In order to use the device at all when a reset is necessary, I have to be sure to hold down the Up Button during the entiire process, which seems to keep the evil Fatal Exception at bay.

That almost guarantees that you have some sort of software conflict since the "warm" reset prevent hacks and system extensions from loading.

__________________

God bless America, my home sweet home...

Posted by mcristia on 08-23-2002 01:05 PM:

quote:
Originally posted by MarkEagle
That almost guarantees that you have some sort of software conflict since the "warm" reset prevent hacks and system extensions from loading.

Mark, are you saying that I should do a hard reset and restore the Visor Pro one app at a time? Isn't there some way for me to identify the offending file(s) and get rid of them without doing a hard reset?

__________________
MANY BLESSINGS!
Peace and Every Good!

Michael W. Cristiani
[email protected]

Posted by MarkEagle on 08-23-2002 02:40 PM:

quote:
Originally posted by mcristia
are you saying that I should do a hard reset and restore the Visor Pro one app at a time?

Only as a last resort... if you're using any hacks, that's where I'd start. Disable them all and restore one at a time to see if it's one of them.

__________________

God bless America, my home sweet home...

Posted by Briguy on 08-28-2002 10:34 PM:

quote:
Originally posted by mcristia

Mark, are you saying that I should do a hard reset and restore the Visor Pro one app at a time? Isn't there some way for me to identify the offending file(s) and get rid of them without doing a hard reset?

You might want to try the Reset Tester utility from Kopsis Engineering.

briguy

Posted by mcristia on 08-29-2002 12:32 AM:

quote:
Originally posted by Briguy

You might want to try the Reset Tester utility from Kopsis Engineering.

briguy

Will do. Thanks!

__________________
MANY BLESSINGS!
Peace and Every Good!

Michael W. Cristiani
[email protected]

All times are GMT. The time now is 09:10 PM.

Show 20 posts from this thread on one page