VisorCentral.com (http://discussion.visorcentral.com/vcforum/index.php)
- Accessories (http://discussion.visorcentral.com/vcforum/forumdisplay.php?forumid=3)
-- Stowaway Keyboard with Prism (http://discussion.visorcentral.com/vcforum/showthread.php?threadid=9381)

HI,

I just got my Prism, Omnisky Modem, and Stowaway keyboard. Everything is working pretty good so far, execpt for a couple fatal crashes.

The only problem that I cannot figure out, is with the stowaway. Everytime I go to use the stowaway, I cannot type. I have to go, click on the stowaway icon, and UNCHECK, and then CHECK "Enable Stoway".

If I do that, it works fine.

Any ideas?

Robert Rinkewich
http://www.pluscellular.com

Are you connecting the Prism to the Stowaway with the power OFF, then turning the power on once the Prism is in place? If not, doing so should solve your problem.

tyler

and make sure that beam recieve is on. for some reason ir has to be enable for the keyboard to work

__________________
http://signature.coola.com/[email protected]

quote:

---

Originally posted by HostileJava
and make sure that beam recieve is on. for some reason ir has to be enable for the keyboard to work

---

__________________
I do NOT look wierd! I just look ... "different".

Thanks

Yes, that was the problem, needed to be turned off first.
Thanks

Robert Rinkewich
http://www.pluscellular.com

quote:

---

Originally posted by dpdamour

quote:

---

Originally posted by HostileJava
and make sure that beam recieve is on. for some reason ir has to be enable for the keyboard to work

---

Beg to differ. I (always) have my VPR's "Beam Receive" in "Off" mode and have no problem with the Stowaway.

=Dave=

---

__________________
http://signature.coola.com/[email protected]

Sorry, we have 2 different conversations going on here. I meant that he was right that I needed to turn the prism power "off" before attaching in to the keyboard.

robrink, I know for sure what's your problem. It's not IR recieve or anything.

I had this problem with my Visor Deluxe as well.

According to the Targus FAQs, this happens (on all Visors) when you install some program that took over the Visor's COM port.

It's very easy to fix this - delete the Stowaway keyboard driver and then re-install it (whether via beaming or HotSync)and it should work with no problems after that.

Also, be aware that your Visor needs to be OFF before you connect it to the Stowaway. If it is ON when you connect it, you'll have to turn the Visor on and off again and the keyboard should be detected automatically.

Tell me if the above steps work for you.

__________________
Tan Kit Hoong,
Star Publications (M) Ltd
<img src="http://thestar.com.my/tech/images/thestar_140x45.gif">